878 Royalty-Free Audio Tracks for "Low Sound"

Sound design elementskick effect,is perfect for drum machine,cinematic uses,video games. Effects recorded from the field. Recording gear-zoom h6 and microphone - røde ntg5reaper daw - audio processing.

06. 22. 16: a punch created from the sound of a leather glove being whipped, processed alongside a thickly-layered kick drum.

This sound was recorded at the campus of poblenou of the pompeu fabra university, in the area of tallers in the corridor a-b. It was recorded between 14:00-14:20 with a zoom h2 recorder. The sound consist in percussive and low-mid frequency sound produced by the whole pencil case falling and impacting into the floor.

Recorded inside of an abandoned building next to a boarded-up, old wooden exit door. Has a nice, subtle low hum, which is actually from a plane flying overhead. Also contains knocking sounds, which is most likely the door being a bit loose. Would be awesome for horror atmospheres. Feel free to use this sound for what ever you wish to. Credit is appreciated but not needed. Let me know what you use this sound for!.

Recording of a door being opened and closed, and then opened and closed again. Very slight footsteps (on carpet) can be heard. The microphone (sennheiser mkh-50) was intentionally placed about 5 feet away from the door so as to capture some of the natural room sound/reverb (which is very subtle). I have another recording available of the exact same door and mic setup, but aimed slightly off-axis to capture just a bit more room sound. Recorded into a tascam 208i audio interface and into adobe audition. Very minor processing (low-cut at 80hz to remove low-freq rumble).

Created with granular synthesis. Something related to a spaceship, engine room, another drone sound; could be a distant low end for a pad, as it is tonal (a note). Will loop if you crossfade between start and end. Enjoy. Https://soundcloud. Com/vospi.

These samples come from a gakken sx-150, a small analogue synthesizer kit that was released in japan 2008 as part of the gakken hobby magazine series. The synth became very popular also outside of japan, mainly because it's a low-cost analogue synth with a great sound that offers lots of possibilities for circuit benders.

Recording of a small plastic toy ball which, when moved, makes a rain-like sound. Recorded and processed at 24bit 96khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

This sounds were a mix of different recorded with tascam dr07,the sounds were achieved from:. --blowing on a sponge--swiping a finger on the wall--waving a cardboard for the low sound--dragging a brush on the wall--air sounds with pich bend effects and modulation fx. The sounds were mixed and edited in adobe audition.

Music box revolved on a 12" x 12" piece of hard foam. Edited with audacity. Recorded on shock-mounted zoom h1 mic, record level 62, autogain off, gain low. Record location, inside a car in a single garage (great sound room). Http://i. Imgur. Com/vmsk08p. Jpg.

This is the sound of a kubota three-cylinder diesel. Between 57 seconds and 1:15 it was being driven. The low speed was 600 rpm and it only goes to 2500, a surprise to me. They made me drive it in "turtle. " i was not trusted with "bunny. ".

Recorded and processed at 24bit 48khz using a rode nt1-a condenser microphone. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

A ride/cymbal sound made with sunvox. It's a sampled noise impulse with a certain starting phase sent through a bandpass and then a reverb with a low room size, which acts as a resonator. It then goes through another filter and reverb set, then a compressor.

A ride/cymbal sound made with sunvox. It's a sampled noise impulse with a certain starting phase sent through a bandpass and then a reverb with a low room size, which acts as a resonator. It then goes through another filter and reverb set, then a compressor.

A ride/cymbal sound made with sunvox. It's a sampled noise impulse with a certain starting phase sent through a bandpass and then a reverb with a low room size, which acts as a resonator. It then goes through another filter and reverb set, then a compressor.

Here's a recording of people walking on a bordwalk beside saint-laurent river in québec. This recording was made with a sound devices usbpre2 into a tascam dr-680 (spdif) and 2 microphones studio project c1 in ortf stereo pattern with a 80hz low cut.

This sound is from a field-recording in the peninsula de paraguaná, edo. Falcon, venezuela. It is basicaly wind hiting the mic´s diafragma, equalized at a very low frequency. Trying to get better on the pluggin, please leave comment if you like. . !!.

Synth bagpipes with snare only. I made this for the backing track, at very low volume, for a video sound track. It's good enough for something like that. I don't know anything about pipes so don't freak out if play them. It's g at 100bpm in 6/8.

Some wind was blowing through some wooden blinds in my house and making this obnoxious howling sound, so i captured some of it :p. Recorded with a rode nt1.

Smooth fm chords for calm atmosphere in movie. Use fat low pass filter depending on your taste. Highs should be mostly removed, i left them there - you need to decide how much highs you want to keep. It reminds me roland sound. Optionally add roland chorus tal-chorus-lx.

The sound of something or someone shrieking rhythmically in the cemetery while i was passing by around midnight. The shrieking went for probably 30 seconds at a time, with pauses of around 30 seconds in between. I recorded it on my cell phone, so it's terrible quality.

Recorded and processed at 24bit 48khz using a rode nt1-a condenser microphone. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

This is actually a low pitched log drum hit, with delayed reverberation, for that natural reflection of sound heard after a loud bang in the distance. --------------------------------------------------------------need notification sounds for apps and games?check out my collection of $1 pings, clicks, dings and bings :. Http://audiojungle. Net/collections/1725532-bonus-points--------------------------------------------------------------.

A half second (0. 54ish) 8bit sound effect made with pico-8. Sounds like an arcade missile launch or a big jump. Could also be a space invader ship being killed, but not epic enough for player defeat. . . No rights reserved. Notes to help me keep track: jerimee richir pico-8 2017 sfx3. Wav.

Rain storm in the city - cars passing over wet streets, distant low rumbling of thunder - close up of water droplets striking pavement. As a courtesy if you download my sounds please subscribe to my youtube channel: https://www. Youtube. Com/user/mycompasstv thanks!. If you use this sound please consider donating to freesound. Org. ► support us via paypal: https://www. Paypal. Me/mycompasstv many thanks!.

Close-up recording of a pc fan with a zoom h-5. Post-processing done in cubase. It's always nice to hear what projects you use these sounds for. Let me know!. If you want more cc0 sounds, please consider supporting me on flattr. Https://flattr. Com/profile/cabled_mess.

This is a leather rubbing foley sound, created using a tascam dr07mk2 and. . . Leather!. Long recorded track enables users to select a certain length in the track and accustom it to their film or project. Feel free to edit, cut and boost the track if needed. Some credit wouldn't hurt. Good luck filming. :). Specs:. Tascam dr07mk2. Stereo x/y pattern. 24 bit 96khz. Sampled to 16 bit 96khz. Low noise.

Dark background sound in place of background music. I recorded this in my booth, using audacity and my cad e100s. The higher sound is a pen tapping on the bottom of a metal cup. I used various effects to stretch, raise pitch, and a few others. I also layered the higher sound 4 times to get the "harmony". The low sound was my voice. I lowered pitch, speed and stretched the wave, as well as a few other effects as well. Enjoy.

This is a foghorn-like sound that i created using an accidentally recorded poot from a friend. I stretched the sound bite a few times while lowering the pitch, added a couple different reverb effects, and then finished it with some parametric eq, raising the bass, and using a low pass filter to cut out the high frequencies. If you would like the original poot sound, i have also uploaded it as fart sound 1.

A sound demo of the registers Violin, Viola and Horn, with modulation, crescendo and sustain. You will hear random akkords. Note: Horn is the low pass filtered version of the register Trumpet, not an additional register. Trumpet sounds much brighter. If the button Horn is pressed, you may release the button Trumpet, without any change in sound. Horn means French horn. The Trumpet or Horn register offer the effects of the brass section in an orchestra This is the famous and well known sound of the Arp/Solina String Ensemble! Data of instrument: Series 76 (Manufacturing year) No. 0131202 Manufactured by B. V. Eminent - Bodegraven - Holland

This sound was recorded in a forested area called lot 2, a low lying floodplain in the town of coffs harbour. It might be bulldozed to make land room for houses. In case it does go, this sound was captured so a part of it might still exist. Recorded on a zoom h4n pro, edited and looped in audacity. Recorded on 30/04/19.

Akkords played first without, later with modulation (chorus). You can hear the warm and bright sound of this instrument. The registers (choires) are Viola, Violin and Horn. With sustain. Note: Horn is the low pass filtered version of the register Trumpet, not an additional register! Data of instrument: Series 76 (Manufacturing year) No. 0131202 Manufactured by B. V. Eminent - Bodegraven - Holland

This helicopter sound design was created at fl studio, in the sytrus synthesizer. The sound consists of four layers. 1. Sine wave frequency of 44 hz. Simulates the low frequency noise of propeller blades. 2. White noise passed through the svf filter. Simulates the noise of propeller blades. 3. Saw wave. Simulates the sound of an engine. 4. The sine wave. Imitates a high-frequency whistle of the engine. Various modulations are applied to all waves through the envelopes of the synthesizer. Next, the signal on the mixer channel is processed by a multi-band exciter and equalizer. Then a signal was sent to two channels with delay processing. One of them imitates reflections. In the lower-middle frequency range. On the second in the upper-middle frequency range. As you approach the sound source, the volume parameters of the direct and reflected signals are automated, low pass filter, pan width and equalization of direct sound. The helicopter performs strange maneuvers, as if making constant circles during the approach to the listener. I did not seek to create the veracity of these maneuvers.

Approaching army? rising nightmare?. Wrote/recorded an eerie nightmare approaching in the distance sound. The sound starts soft and builds to a crescendo. Ezdrummer2 was used w/ a low pass eq filter. Panned left is ableton stock plugin glass cave mirror. Panned right is polar pad. Center is the ezdrummer2 w/ a low pass eq filter combined with the all alone pad stock plugin. Each track is sent to a return track w/ heavy reverb and adjusted for parallel processing. Additional notes:-13. 4 lufs integrated-2. 1 db true peak max. Want something more customized? send me a note or visit my youtube. Com/bainmackhope this helps and is useful for your next project. Cheers,bainmack.

Recording of sea undertow on the beach of formicoli, vibo valentia, calabria, italy, the 19th agust 2022 16:44. The sound was recorder with a zoom h1n with windshield at a short distance from the crashing of the waves on the beach. The waves are driven by a light, gentle wind. The sound was recorded by holding the microphone in my hand while i dived knee-deep into the water and walk, filming the crashing of the waves (also on my legs). High-frequency sound details (the foam of the sea, the impact of waves on each other, etc. ) are much more audible here. Processing:* volume adjustment;* 120hz high pass filter (to reduce low some low frequencies rumble due to the wind);* cut and crossfade to eliminate very few mechanical noise of my hand on the mic;.

Synthesized drone. Created using the electribe 2 with its synth engine. Post-processing was done in cubase. More stuff in a similar vein:http://freesound. Org/people/cabled_mess/sounds/333638/http://freesound. Org/people/cabled_mess/sounds/333639/https://www. Pond5. Com/video-sound-effects-music-after-effects-photos-illustrations-images-3d-models/1/clipbin%3a1113500. Html.

I recorded this using my small sony cybershot camera. You'll notice that the wind goes from loud to soft to loud again, repeating. This because i am opening the window wide and then after a few seconds i close the window but not completely so that i get some low whistling sounds from the wind. I recorded for 18 minutes and i used audacity to edit it. Hope this sound is useful for you!.

Recorded inside a closet. Low noise, not much reverb. Sounds almost machine-like with a satisfying thump. Recorded on a phone. I messed around with it to get it to sound nice. In case you do something that mixes the channels: on the opening part i copied a 5khz to 8. 5khz band from the left to the right channel, so that frequency band is mono.

A sound composed from bunching wet paper towels smacked against the floor and a wet bottle of liquid being sloshed mixed together to create an impact sound. Creates a horrible sensation of flesh impacted by a powerful shockwave. A bottle with liquid being sloshed around gently can provide the needed element of a subdued liquid sound - taking away the need to filter it with low pass filters (but it can help boost other frequencies).

I made this using two oscillators in native instrument's fm8 synth. There is nothing too fancy, just two sine waves played out the same output, but one has an offset of 440hz, and the second oscillator has an offset of 330hz. I then just played two notes that didn't sound too dissonant, and then ran it through some low-fi processing.

Wind turbine sound, near lacedonia, campania, italy, the 16th august 2022 @ 18:30the sound was recorder with a zoom h1n with windshield from a distance of 25m approx from the wind turbine. Processing:* 120hz high pass filter (to reduce some low frequency rumbles due to the wind);* volume adjustment;. Other sound in the recording:* voice of a woman in the distance (at the beginning of the file);* wind gusts;* car passing by (at the end of the file);.

Tennis ball bouncing on a tennis racket: in this sound you hear a tennis ball bounce on a tennis racket. At times the racket makes a metallic sound when the ball bounces off it. Recorded using the zoomh4n and the rode ntg1 condenser shotgun microphone. I added a low shelf and and 2 bands to try and make it sound less metallic at times. The ball used is a wilson ball and a wilson tennis racket.

The beep tones my old pager makes when it is turned on. There are a couple 'boot up' beeps followed by the 'low battery' warning beeps. I needed some of this sound to use in a theatrical production [ a new brain ]. I recorded it on my laptop computer using a cheep condenser mic and audacity.

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Here's a recording of light waves on the shore of saint-laurent river in quebec, canada. This stereo recording was made with a sound devices usbpre2 into a tascam dr-680 (spdif) and 2 studio project c1 in ortf with a 80hz low cut.

Track was created using audacity®. The track was a generated chirp of 1 sec. Repeated once and then reversed. The gverb filter was used with a low early reflection and high room size value. And then the echo filter with 0. 2 delay time of seconds and decay factor of 0. 5 seconds was applied.

Stereo recording of three linked diesel locomotives idling in the train yard. Captured from the side and roughly centre, with work sheds to the left. Recorded with a zoom h1, mastered in sound forge 5. Eq'ed to reduce low-end rumble and edited for easy looping.

Stereo recording of three linked diesel locomotives idling in the train yard. Captured at an angle to the lead engine, with the others muffled by work sheds. Recorded with a zoom h1, mastered in sound forge 5. Eq'ed to reduce low-end rumble and edited for easy looping.

This is the sound of pressing a tap and let the water flow of a toilet (low frequency) from the roc boronat building in the upf campus poblenou, barcelona. It was recorded at 13. 35. Recorded using zoom h4, normalized with audacity and adde fade-in and fade-out.

This is a continuous sound (low frequency) of the wind and the friction of it with the microphone. It's recorded inside of the playground at upf campus of poblenou, barcelona. It was recorded at 13:20. Recorded using zoom h4, normalized with audacity and adde fade-in and fade-out.